SPINNAKER POLES

We currently offer

2 TYPES OF POLE END FITTINGS

PISTON	CONE

(New Type)
45,50,57,70, 80mm	80,100mm

We can also supply poles with HARKEN PISTON ENDS.

Click here for larger illustration of our new piston pole ends

HIGHLIGHT dayboat by Keith Callaghan has Z Spars Z145 mast and a 45mm spi pole with Z Spars piston ends

Pole tubes are made from aluminium alloy. The spinnaker pole length normally equals your yacht's J measurement (distance from mast to forestay at deck). Longer poles can be supplied, but problems with stowage may arise.

Note: we do not guarantee our pole ends if not set on a Z Spars mast with our fittings. An incompatible mast fitting may result in breakage of the pole end. We recommend an internal ring diameter of 45mm for piston ends, but this can be reduced to 38mm if the ring is a complete circle (as with a Nautec car, for example).

SPINNAKER POLE PRICES 2007

POLE	POLE	WALL	STD	POLE	INBOARD	PRICE	O/B	PRICE	PRICE	PRICE
REF	od	THICK	TUBE	LENGTH	END	INBOARD	END	O/B	TUBE	MADE-UP
	mm	mm	mm	mm	FITTING	END	FITTING	END	ONLY	POLE
We offer the 2 types of Z SPAR pole ends as follows:
45 piston	45	2	2300	2470	piston	£26.00	piston	£26.00	£28.00	£90.00
50 piston	50	2	2900	3070	piston	£28.00	piston	£28.00	£40.00	£110.00
57 piston	57	2.1	3500	3670	piston	£30.00	piston	£30.00	£55.00	£130.00
70 piston	70	2.5	5000	5230	piston	£31.00	piston	£31.00	£97.00	£174.00
80 piston	80	2	6000	6230	piston	£33.00	piston	£33.00	£103.00	£190.00
80 cone	80	2	6000	6215	cone	£31.00	piston	£33.00	£103.00	£189.00
100 cone	100	3	7000	7245	cone	£43.00	piston	£53.00	£238.00	£360.00
We also offer Poles with HARKEN ends:
50 Harken	50	2	2900	3086	piston	£49.79	piston	£49.79	£40.00	£178.00
70 Harken	70	2.5	5000	5260	cone	£44.25	piston	£129.73	£97.00	£302.00
80 Harken	80	2	6000	6260	cone	£45.10	piston	£132.40	£103.00	£313.00
100 Harken	100	3	7000	7245	cone	£56.96	piston	£160.38	£238.00	£510.00

All prices ex VAT, ex works.

Spinnaker Pole Accessories Page

Last updated 21 February 2008